Double Glazing Lock Repairs
The best locks for your doors and windows will stop burglars from entering your home. They aren't likely breaking glass or trying to get through windows that are open.
However, some double-glazing owners have had issues with their door or window lock after it's been installed. These problems can often be resolved without the need for a new double glazing.
Broken or faulty locks
A locksmith can repair your uPVC window or door lock if it's broken or faulty. They can fix the hinges, striker plates and locks on your double-glazed. They will also be able to adjust the cylinder's position to correct any misalignment issues that may be causing your handle to not work correctly.
The mechanism may be locked when the key fits into the lock, but it will not turn or be difficult to insert. This can be caused by dirt or grime getting stuck inside the mechanism. If this is the situation it is possible for the lock to be cleaned and lubricated. It is essential to use a dry lubricant, like graphite or teflon, rather than oil, which attracts dirt and stick to the inside of the mechanism. After the lubrication, insert the key into the lock and turn it. The lubricant should make through the mechanism and the lock should be able to rotate without difficulty.
A faulty lock can also be caused by loose screws in the mechanism of the lock. They can loosen and fall out or break off completely, preventing the lock from functioning properly. These screws can be tightened by using the help of a screwdriver. However, be cautious not to tighten them too much. This could cause damage to the internal components.
A broken lock can be hazardous for you and your family. This is especially true if you have small children. They can easily unlock the door without knowing which gives them access to your home. If you're concerned that this might occur, a licensed professional locksmith can assist you re-secure the double glazing doors.
Misty Glaze is a professional uPVC company in Lancing that can repair all types faulty and broken mechanisms on uPVC doors and windows. We can also reconfigure the locking mechanism on your uPVC windows or double glazing to meet your needs. This means that replacement doors and/or windows are not always necessary.
Handles that are damaged or broken
As part of their overall security plan, many double-glazed windows come with a multipoint lock. This is a great option for those who are concerned about opportunistic thieves looking to gain access to your home. Ask double glazing repair near me about antilift blocks. They can be put in in addition to existing locks and aid in keeping your windows shut.
Handle locks can be damaged or fail. They are the first thing criminals employ to open your window. The good news is, this is one of easiest parts to fix.
Modern uPVC and aluminium handles operate a multi-point locking system called Espagnolette which is designed to resist forced entry. This security upgrade is offered as an option for new uPVC windows. As an alternative upgrade, older uPVC or aluminium handles that are no longer in use can be upgraded to shoot bolt locking systems.
When a handle is faulty it is essential to get the handle repaired as quickly as possible. A damaged handle can stop the window from closing properly and letting in a draft. It can also be a flaw that thieves who are opportunistic could exploit and put the belongings of your family and you at risk.
The process of repairing the failed mechanism starts with opening the frame of the window and removing the damaged handle. The gearbox can then be accessed to identify the type of gearbox that is used to open the handle. This will permit a replacement that matches the profile and the internal window frame mechanisms.
After the mechanism has been repaired the handle can be reattached using the original screws. We recommend replacing them with more long screws since they provide the most secure fit. The final step is to seal the handle using a clear sealant. This will help protect it from further corrosion. Once you've completed this step the window should be fully functional again at a fraction of the cost of replacing it.
Broken or Faulty Hinges
If your windows don't close properly, draughts can be able to enter, your home's security barriers will become weaker and you run an increased chance of damp or water damage. Window hinges that break or fail are a common issue and can be easily repaired.
If your uPVC windows don't open or shut it's likely that the hinges need to be replaced or repaired. While a lot of window companies require that you purchase a new window unit to fix this simple problem We can replace the hinges that are damaged and save you money.
Window hinges are usually damaged by repeated use, or weakening over time due to corrosion. If you find a damaged hinge, it's important to take steps to prevent further damage by taking care not to force the window open or closed.
The type of hinge you are looking for will help you locate the correct parts to fix it. The most common types of window hinges include Maco, Mila, Roto and other brands. Talk to a professional before purchasing parts that will not work with your existing hardware. This can result in further damage.
The hinges that are not working properly can be a huge problem for uPVC doors and windows. They can be a major source of noise, and can also permit water to enter your windows.
Verify whether the pin barrels on both sides of the hinge are aligned. If it's not then tap the headpin using a hammer in order to create an incline in the hinge barrel. This will help keep the pin in position. Ask a friend to hold the doors as you take out hinge screws and hinges. Replace the hinges and install screws using glue. Finally, while the glue is drying, put a secure hold on the hinges with clamps or weights.
After you have repaired your hinges, you are able to put the door back in place. You could also reattach the handle. It is a good idea to replace the screws with the same length of wood dowels as the original screw so that they are in line with each other.
Broken or Faulty Glass
While uPVC windows do an excellent job of keeping the cold out and warm in, they are susceptible to becoming damaged over time. This could include cracked or damaged glass, as well as faulty locks. If neglected, this could be a costly problem. It can also hurt your home's aesthetics and cause a loss of insulation. It is important to repair any damage immediately.
You can repair your cracked glass yourself if you have the proper tools and techniques. Make sure the area surrounding the broken glass is clear of debris so that any pieces of glass do not cause injuries or cause a trip hazard. After that, take away all broken glass pieces and dispose of them in a proper way. Apply masking tape to the entire area. This will prevent glass shards from sticking to your skin and scattering when you move them. Making sure the glass pane is fitted prior to applying glue is an ideal option when you have windows that have two panes. This will ensure that you have enough space to complete your project.
Use a clean, dry cloth to wipe clean the glass's surface and the frame prior to applying the glue. Follow the curing and application directions that may differ from product to product. You may need to clamp the glass that has cracked with lightweight clamps designed to hold fragile materials, based on the angle.
After the adhesive has completely set, carefully place the glass inside the window frame. Make sure it is flush with the frame edge and that there aren't any gaps between the glass sash and the frame. Avoid bending the glass as you reinstall it because this could weaken the seal. This could result in condensation or water infiltration.
Contact a professional glazier like O'Brien(r), to arrange an exchange if your glass window is completely shattered. Leaving broken glass unattended can cause danger to children and pets, so it's essential to act swiftly.